How to Waterproof a Concrete Basement Floor?
Basements are forever known for being tough to maintain. This is simply because they have insufficient ventilation and insulation which leads to condensation. On the other hand, the condensation causes dampness and mold on concrete which spreads and damages the floor completely.
Usually, homeowners neglect it - which is a huge mistake. It is important to understand that the concrete basement floor is the only place in the basement where water naturally flows.
So if not taken care of, it can lead to endless problems. However, here are a few methods that will help you waterproof your concrete basement floor.
Related Pages:
How to Prevent Minor Leaks in Basement Ceiling?
Basement Waterproofing Methods
Get ready with the Basement Concrete Floor
It is important to make sure that the basement floor is ready for the procedure. Therefore to get started, you must sweep it clean to ensure that the paint adheres to the surface without spaces.
Do not forget to look for cracks and holes in the surface of the floor. Also, make sure to clean the cracked sidewalls with the help of a wire brush.
Doing this will allow you to remove all the loose concrete and vacuum it up with a wet or dry vacuum.
Repair the concrete
In the second step, focus on repairing the concrete. The cracks or breaks should be sealed so that the waterproofing can be done effectively.
It is recommended to follow the instructions offered in the concrete bags before mixing water into them so that consistency can be achieved.
Usually, the concrete floor has small cracks so filling them with too much concrete is not required. On the other hand, fill a pastry bag with concrete and apply it to the holes.
The edging
Usually, in homes that are older, the border of the concrete basement floor begins to split from the walls.
Therefore to stop this from happening, you can use the pastry bag to apply concrete along the floor's edges.
Once you find that the concrete has become solid, you can seal the joints with the help of silicone tape and fill the area.
Paint it
The last process that waterproofing a concrete basement floor involves is painting. You can choose to paint it with the help of waterproof paint. Start with pouring the paint into the paint tray once you have mixed it.
Make sure to avoid any missing divots and use a normal paintbrush to apply the paint.
Do not forget to apply a second coat and smooth out the paint with the help of a roller to give it a final look.
Pro tip !!
According to the professionals, you can follow a fantastic technique to waterproof the basement by using a substance that generates a slurry mix when combined. Preferring to use this slurry mixture can be easily applied on the walls and the floors and can be beneficial in multiple ways. The best part is that they have a low odor, are simple to use, and can be easily blended with water.